Vertical machining center

Makino D200Z

MAKINO D200Z
Makino Professional 6 (FANUC FS31i-B)
Professional 6 Version

X-axis 350 mm
Y-axis 300 mm
Z-axis 250 mm
B-axis (swivel range) 180° (0° – 180°)
C-axis (rotation angle) 360° continuous
Bwedo Ah D Twjpfx Abajw
Distance table surface – spindle center 160 – 410 mm
Table Max. load capacity 75 kg
Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions)
Chuck EROWA

Speed range 100 – 30,000 min⁻¹
Drive power (25 % ED / continuous) 15 kW / 11 kW
Torque (25 % ED / continuous) 23.8 Nm / 21 Nm
Interface HSK-E50

Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm
Repeatability X/Y/Z ± 0.0010 mm
Positioning accuracy B/C-axis ± 2.0 s
Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s
Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C.

Capacity 20 tools
Max. tool weight 3 kg
Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions)
Max. tool length 200 mm
Interface HSK-E50
Connected load 40 kVA
Compressed air
5 – 8 bar, max. 500 l/min
2,300 × 1,868 × 3,030 mm 4,600 kg

Spindle with 30,000 rpm, HSK-E50 interface
Rigid tapping
Table with EROWA / System 3R chuck (DD motor), high-precision bearings
Linear scales (X, Y, Z)
Tool changer with 20 pockets (ATC 20), HSK interface
Collision Safeguard (CSG)
Robot door, loader interface (A-type)
Chip conveyor with drum filter and downstream cyclone filter
Flushing channel, air blower, coolant nozzles at spindle nose
Fully enclosed work area, safety-guarded operator door
Portable hand pendant
Super GI.5 control, High-speed smooth TCP, GI-Smoothing
Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining
3-dimensional cutter compensation, tilted working plane
Dynamic fixture compensation for rotary table, VP control
Adaptive control (AC Control), energy saving function
2 GB part program memory, Data Center 1 GB, 1,000 programs
Tool compensation memory: 400 offsets, type C
54 workpiece coordinate systems (6 + 48)
User macro programming with 1,100 variables
MRDF sensor (Machine Relocation Detection Function)

EROWA Power Chuck
Loader interface (A-type) instead of (L-type)
Coolant temperature control unit (constant coolant temperature, with heating)
Workpiece wash gun (operator side)
Coolant shower
Connection for oil mist extraction (Ø 125 mm)
Air dryer
Tool length measurement by BLUM laser, incl. tool breakage detection
3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point)
i-Set-up (additional operator panel for easy workpiece alignment)
MML interface (fast Ethernet card)
Network integration
Remote diagnostics setup (VNC/EDM viewer, installation and training)

OPC UA interface for Professional 6 (35 readable tags)
Tool retract and re-approach function
3D model of the working area